# Automotive UTM - Link: https://flexitest.in/automotive/automotive-utm/ - Published: 2024-06-17T09:00:52+05:30 - Author: chetanvarne # Universal Tensile Testing Machine Automotive 1. [Home](https://flexitest.in) 2. [Automotive](https://flexitest.in/automotive/) 3. Automotive UTM ![Flexitest Universal Tensile Tester](https://flexitest.in/wp-content/uploads/2025/ 04/UTM-all-model-main-banner-new.webp "Automotive UTM 179") ## Empowering Automotive Excellence Through Precision Testing of Materials. Discover the Power of Universal Tensile Testing Machines for Accurate Material Analysis. Ensure Quality and Performance with Precise Tensile, Compression, and Elongation Measurements. Optimize Your Quality Control and R&D with our Tinius Olsen UTM’s ## Key Considerations Key Considerations for Selecting a UTM Across Industries ![UTM ASTM Standards](https://flexitest.in/wp-content/uploads/2025/09/ASTM.webp " Automotive UTM 180") ## ASTM ⏎ Standards ![UTM ISO Standards](https://flexitest.in/wp-content/uploads/2025/09/ISO.webp "Automotive UTM 181") ## ISO ⏎ Standards ![UTM Sample Dimensions](https://flexitest.in/wp-content/uploads/2025/09/Sample- dimensions.webp "Automotive UTM 182") ## Sample Dimensions ![UTM Service & Supports](https://flexitest.in/wp-content/uploads/2025/09/Service- supports.webp "Automotive UTM 183") ## Service & Supports ![UTM Test Speed & Control](https://flexitest.in/wp-content/uploads/2025/09/Test- speed-control.webp "Automotive UTM 184") ## Test Speed & Control ![UTM Capacity & Force Range](https://flexitest.in/wp-content/uploads/2025/09/Capacity- force-range.webp "Automotive UTM 185") ## Capacity & Force Range ![UTM Grips & Fixtures](https://flexitest.in/wp-content/uploads/2025/09/Grips-fixtures. webp "Automotive UTM 186") ## Grips & Fixtures ![UTM Standard Software](https://flexitest.in/wp-content/uploads/2025/09/Standard- software.webp "Automotive UTM 187") ## Standard Software Edit Template ## Universal Tensile Testing Machine Solutions ![UTM 5ST / 5 kN Universal Testing Machine](https://flexitest.in/wp-content/uploads/ 2025/04/UTM-5ST.webp "Automotive UTM 188") ## 󠀁[UTM 5ST / 5 kN Universal Testing Machine](https://flexitest.in/automotive/automotive-utm/utm-5st-5-kn-universal-testing-machine-automotive/)󠁿 ![UTM 25ST / 25 kN Universal Testing Machine](https://flexitest.in/wp-content/uploads/ 2025/04/UTM-25-ST-1-1.webp "Automotive UTM 189") ## 󠀁[UTM 25ST / 25 kN Universal Testing Machine](https://flexitest.in/automotive/automotive-utm/utm-25st-25-kn-universal-testing-machine-automotive/)󠁿 ![UTM 50ST / 50 kN Universal Testing Machine](https://flexitest.in/wp-content/uploads/ 2025/04/UTM-100ST.webp "Automotive UTM 190") ## 󠀁[UTM 100ST / 100 kN Universal Testing Machine](https://flexitest.in/automotive/automotive-utm/model-100st-universal-testing-machine/)󠁿 ![UTM 300ST / 300 kN Universal Testing Machine](https://flexitest.in/wp-content/ uploads/2025/04/UTM-300-ST.webp "Automotive UTM 191") ## 󠀁[UTM 300ST / 300 kN Universal Testing Machine](https://flexitest.in/automotive/automotive-utm/model-300st-universal-testing-machines/)󠁿 ## Automotive test standards compliance  Verified compliance across international standards (ISO / ASTM) ![UTM ISO Standards](https://flexitest.in/wp-content/uploads/2025/09/ISO.webp "Automotive UTM 181") ![UTM ASTM Standards](https://flexitest.in/wp-content/uploads/2025/09/ASTM.webp " Automotive UTM 180") ## ISO 6892-1 | ASTM E8 ## Tensile strength of steel, aluminium, and alloy components ## ISO 527-1/2 | ASTM D638 ## Dashboard, bumper, and interior plastic components ## ISO 178 | ASTM D790 ## Bending strength of structural polymer parts ## ISO 37 | ASTM D412 ## Rubber seals, gaskets, hoses, and weather strips ## ISO 527-4 | ASTM D3039 ## Carbon/glass fibre-reinforced structural composites ## ASTM A370 | ASTM D3039 ## Mechanical properties of steel (tension, bend, hardness) ## ASTM D6775 ## Seatbelts, harnesses, safety restraint systems #### Submit Your Details to Download Brochure! Name Email Phone Number Company Name State By clicking the button, I agree and consent to the company’s [Privacy Policy](https://flexitest.in/privacy-policy) Get Free Quote ## Select the right UTM for your specific requirements Compare Flexitest universal testing machine models by load capacity, test speed, working area, dimensions and weight. ← Swipe to see full table → Universal testing machine specifications: 1ST to 300SL | Specification | Unit | 1ST | 5ST | 10ST | 25ST | 50ST | 100ST | 150ST | 300ST | 300SL | | Capacity | kN | 1 | 5 | 10 | 25 | 50 | 100 | 150 | 300 | 300 | | Capacity | lbf | 200 | 1,000 | 2,000 | 5,000 | 11,000 | 20,000 | 30,000 | 60,000 | 60,000 | | Test speed range | mm/min | 0.0001–1000 | 0.0001–1000 | 0.0001–1000 | 0.0001–1000 | 0.0001–500 | 0.0001–500 | 0.0001–500 | 0.0001–500 | 0–76 | | Test speed range | in/min | 0.000004–40 | 0.000004–40 | 0.000004–40 | 0.000004–40 | 0.000004–20 | 0.000004–20 | 0.000004–20 | 0.000004–20 | 0–3 | | Clearance between columns | mm | — | — | 410 | 410 | 405 | 656 | 656 | 656 | — | | Clearance between columns | in | — | — | 16 | 16 | 16 | 26 | 26 | 26 | — | | Throat depth | mm | 100 | 100 | — | — | — | — | — | — | — | | Throat depth | in | 4 | 4 | — | — | — | — | — | — | — | | Maximum crosshead travel | mm | 755 | 755 | 1090 | 1090 | 1065 | 1198 | 1198 | 1173 | 648 | | Maximum crosshead travel | in | 30 | 30 | 43 | 43 | 42 | 47 | 47 | 46 | 25.5 | | Dimensions (H × W × D) | mm | 1168×511×467 | 1168×511×467 | 1625×729×506 | 1625×729×506 | 1655×729×506 | 2323×1160×700 | 2323×1160×700 | 2323×1160×700 | 1842×737×483 | | Dimensions (H × W × D) | in | 46×20×18 | 46×20×18 | 64×29×20 | 64×29×20 | 65×29×20 | 91×46×28 | 91×46×28 | 91×46×28 | 72.5×29×19 | | Weight | kg | 58 | 58 | 129 | 129 | 192 | 750 | 970 | 1050 | 1180 | | Weight | lb | 128 | 128 | 284 | 284 | 423 | 1,653 | 2,138 | 2,315 | 2,600 | * Nominal specifications shown for model comparison. Final configuration depends on the selected machine and application. [ Explore All UTM ](https://flexitest.in/universal-tensile-testing-machine/) ## FAQ's  Frequently Asked Questions (FAQs) – Universal Testing Machines What is a Universal Tensile Testing Machine and which ASTM and ISO standards does it support? A Universal Tensile Testing Machine (UTM) applies controlled tensile, compressive, bend, peel, and shear forces to evaluate mechanical properties of materials. Flexitest UTMs support a wide range of global standards including ASTM D638, ASTM D882, ASTM E8, ASTM D412, ASTM D5034, ASTM D828, ASTM F88, ISO 527, ISO 6892-1, ISO 37, ISO 13934, and ISO 1924 — covering plastics, metals, rubber, textiles, paper, and packaging materials. How is a UTM used for tensile testing of plastics per ASTM D638 and ISO 527? ASTM D638 is the standard test method for tensile properties of plastics, evaluating tensile strength, elongation at break, and tensile modulus using dumbbell-shaped specimens. ISO 527-2 covers the same fundamental measurements but uses different specimen geometry and test speed requirements. ASTM D638 is preferred in North American markets while ISO 527 is specified by European and international buyers. Both are performed on a Flexitest UTM with appropriate grips and extensometer. ASTM International What is ASTM D882 and why is it important for packaging film testing on a UTM? ASTM D882 is a standard test method for determining the tensile properties of thin plastic films with a thickness of less than 1.0 mm and is of great importance in the film packaging industry, both for quality control and research and development. It measures tensile strength, elongation at break, and tensile modulus of flexible packaging films including polyethylene, polypropylene, polyester, and laminate films. The ISO equivalent is ISO 527-3. A Flexitest UTM with film grips performs ASTM D882 testing accurately. Which UTM standards apply to tensile testing of metals and metallic components? ASTM E8 and ASTM E8M describe uniaxial tensile testing of metals at room temperature. ISO 6892-1 is the international standard for tensile testing of metallic materials, covering specimen geometry, grip configuration, and extensometer requirements. ASTM E8 is used by North American automotive and industrial buyers while ISO 6892-1 is the global standard. Both standards measure yield strength, tensile strength, elongation, and Young’s modulus. Flexitest UTM models from 10 kN to 300 kN are suitable for metallic specimen testing. How is a UTM used for tensile testing of rubber and elastomers per ASTM D412 and ISO 37? ASTM D412 and ISO 37 are both widely recognised tensile test methods for evaluating the stress-strain characteristics of rubber materials including natural rubber, synthetic rubber, silicone rubber, and thermoplastic elastomers (TPEs). Dumbbell- shaped specimens are stretched at a controlled speed until break. The test measures tensile strength, elongation at break, and elastic modulus. High-elongation extensometers capable of measuring 500% strain or more are required. Flexitest UTMs with rubber grips and appropriate load cells support both ASTM D412 and ISO 37 testing. How is a UTM used for tensile testing of paper, board, and paper-based packaging? Tensile testing of paper and paperboard is performed per ASTM D828 and ISO 1924 on a universal testing machine. These standards measure tensile breaking strength and stretch of paper, corrugated board, kraft paper, and paper-based packaging materials. Results determine the suitability of paper substrates for flexible packaging, labels, bags, and cartons. Paper testing standards for UTM include ASTM D828 and ISO 1924 Parts 1 and 2. A Flexitest UTM with flat-face grips and appropriate load cell performs these tests accurately. Which standards govern tensile testing of technical textiles and nonwovens on a UTM? ASTM D5034 and ISO 13934-2 describe the grab test procedure for determining breaking strength and elongation of woven, nonwoven, and felted textile fabrics. The method is particularly suitable for woven, nonwoven, and felted materials, providing practical values for evaluating mechanical strength of textiles. ASTM D5034 specifies a specimen width of 100 mm while ISO 13934-2 specifies 100 ±2 mm. Both tests are performed on a Flexitest UTM using textile grips with a constant crosshead speed. What is ASTM F88 and how is it tested on a Universal Tensile Testing Machine? ASTM F88 is the standard test method for seal strength of flexible barrier materials including heat-sealed pouches, medical device packaging, and flexible food packaging. A UTM applies a controlled peel force to separated seal edges at a defined angle— typically 90° or 180° — measuring the force required to peel the seal. ASTM F88 is used for direct heat seal strength testing of flexible barrier packaging materials. Results validate seal integrity, confirm heat sealer settings, and support ISO 11607 medical device packaging compliance. How do I select the right UTM load capacity for my testing application? Selecting the correct UTM load capacity depends on the material being tested. Packaging films, paper, and thin laminates require low-force models from 500 N to 1 kN (Flexitest C610H or 1ST) per ASTM D882 and ASTM F88. Plastics and rubber testing per ASTM D638 and ASTM D412 typically require 1 kN to 5 kN. Metal and composite testing per ASTM E8 and ISO 6892-1 requires 10 kN to 300 kN. Choosing an undersized load cell reduces accuracy while oversizing reduces sensitivity at low forces. How should a Universal Tensile Testing Machine be calibrated to ensure accurate results? UTMs must be calibrated per ISO 7500-1, which specifies verification of static uniaxial testing machines by classifying force measurement accuracy into Class 0.5, Class 1, and Class 2. Load cells must be verified using traceable calibrated weights or reference force transducers. Crosshead speed, extensometer accuracy, and alignment must also be verified. Calibration records must meet ISO 17025 laboratory competence requirements. Flexitest provides NABL-traceable UTM calibration services across all models and capacity ranges. Edit Template