# Why the Permeability Rate of a Polymer Material is Dependent Upon a Variety of Factors

- Link: https://flexitest.in/blogs/why-the-permeability-rate-of-a-polymer-material-is-dependent-upon-a-variety-of-factors/
- Published: 2025-05-06T16:47:37+05:30
- Author: flexitest

# Why the Permeability Rate of a Polymer Material is Dependent Upon a Variety of Factors

 1. [Home](https://flexitest.in)
 2. [Blog](https://flexitest.in/category/blog/)
 3. Why the Permeability Rate of a Polymer Material is Dependent Upon a Variety of 
    Factors

The role of your plastic packaging materials is to protect and preserve the quality
of your food product from production to end-of-use. In the process of designing 
your packaging, choosing the right polymer material for your product and package
is vital to its success. The barrier properties of your packaging material must 
be considered, along with the components of your food, the interactions between 
the material and its environment and its permeability to various gases or vapors.
[Oxygen transmission rate](https://flexitest.in/packaging-testing-equipments/permeability-testing-instruments/oxygen-transmission-rate-tester-3-cells-c203h/)(
OTR), water vapor transmission rate (WVTR) and sometimes carbon dioxide transmission
rate (CO2TR) are most common tests for evaluating the permeability of food packaging
materials. It is essential to test the material’s transmission rates for each of
these gases individually and never assume that your material has the same level 
of transmission rate for every gas, as Polymer materials behave differently to certain
gasses. Likewise, different gasses behave differently to the same material.

This article will explain this is in further detail to hopefully help you make the
best decisions when selecting new materials for your food or beverage packaging.

Oxygen (O2) is abundant in the environment. For most food products, oxygen is destructive
and will cause oxidative deterioration of the food and encourage aerobic micro-organism
growth. Hence the packaging material should be a good oxygen barrier so that you
can meet your desired shelf life (or even improve it) while maintaining the high
quality of the food.

Moisture ingress or egress is also important factors to many food products due to
the fact that the foods physical and chemical deterioration’s are related to the
moisture content within the package. Therefore, it is also vital to evaluate the
[Water vapor transmission rate (WVTR)](https://flexitest.in/packaging-testing-equipments/permeability-testing-instruments/water-vapour-transmission-rate-tester-3-cells-c303h/)
of the packaging material.

CO2 is needed to control aerobic bacteria and mold growth, this is particularly 
important with food related applications. CO2 is often combined with N2 and used
in Modified Atmosphere Packaging (MAP) systems to help avoid food degradation and
extend shelf life. It’s also critical to access the CO2 permeability of a bottle
used in carbonated drink applications to halt any loss of CO2 while on the shelf,
keeping it fully carbonated until consumed.

Although it may be difficult to find a mono-layer polymer material that will serve
as a good barrier for all these gases remember it is possible and that there is 
no such thing as the perfect package. You just need to be sure that it can withstand
the packaging, handling and shipping process while also maintaining the integrity
of the product by properly protecting it from various gases/vapors and environments.
This is where testing plays an important role in helping you choosing the right 
material for your package application.

## For example, HDPE has the following permeation rates (relative values are shown) to the following gases:

HDPE Permeation Rates by Gas

  |  Polymer |  Oxygen |  Nitrogen |  Carbon Dioxide |  
   |  HDPE |  73 |  17 |  580 |  
 |  High Density Polyethylene (HDPE) is a rigid, tough and strong resin of natural milky color. HDPE has very good stress crack resistance as well as high impact and melt strength. HDPE is appropriate for personal care, beverages, food and chemicals. It lends itself particularly well to blow molding. |

**When HDPE is compared with PET, their permeation rates (relative values) to oxygen
are also different.**

  |  Polymer |  Oxygen |  
   |  HDPE |  73 |  
 |  PET |  2.3 |  
 |  Note: Data source: Permeability Properties of Plastics and Elastomers, 2nd Edition, L. Massey. |

Now that we have the basics down let’s dive deeper into what makes a polymer behave
so differently to specific gases/vapors. The phenomenon we see here is related to
permeation theory, the chemical and physical natures of the polymer and the permeants,
as well as the interaction between the polymer and the permeant.

**Permeation Theory:**

**P = S X D**

## Permeability

 From permeation theory, we know that P = S x D. It means that permeability (P) 
is directly related to diffusivity (D) and solubility (S) of a polymer material.
Here S is the solubility of a polymer material that related to “like dissolves like”.“
Like dissolves like” is an expression used by chemists to remember how chemical 
substances tend to dissolve in solvents of similar structure. It refers to “polar”
and “nonpolar” solvents and solutes. Basic example: Water is polar. Oil is non-polar.
Water will not dissolve oil. When talking about gas and polymer, water is polar,
so it would dissolve more into polymers that are polar such as PET, Nylon and such.
While O2 is non-polar, it would dissolve into non-polar polymers such as PE, PP 
and most polyolefins. Therefore, usually WVTR is higher for PET, EVOH, Nylon and
alike, but OTR will be higher for polyolefins such as PP, PE, etc. On the other 
hand, D is the diffusivity that is related to the permeant molecule’s size and how
fast it moves. Smaller molecules such as Hydrogen and Helium usually move much faster
than H2O and O2. Hence, gases with smaller molecules will have higher transmission
rate.

## Permeation Affected by Environment Factors

Temperature plays a major role in the permeation rate of a material. The higher 
the temperature, the higher the permeation. As a Rule of Thumb, every 10°C increase
in temperature, the transmission rate doubles, or every 1°C increase, the transmission
rate increases 5-7%.

The relative humidity (RH) in the environment can impact polymer differently. RH
can greatly affect permeation for hydrophilic materials. Proper RH generation and
measurement are necessary for accurate permeation results.

## Permeation Affected by Partial Pressure Differential of Permeant Gas

The driving force for permeation is the partial pressure differential of a permeant
gas. An example is CO2 permeates out from a bottle of carbonated soft drink after
4atm of CO2 is filled inside the bottle to start with.

The permeation is proportional to this driving force. For example, if a film’s OTR
is 5 cc/(m^2·day) when the driving force is 21% oxygen (room air), its OTR becomes
23.8 cc/(m^2·day) when the driving force is 100% oxygen.

## Other Factors

There are other factors (Cooksey, K.) would influence the transmission rates for
different gases. To name a few, the polymer structure, crystallinity, plasticizer,
co-polymer, thickness of the film, are among those affect the barrier level of a
specific polymer material.

## Take Away Message:

Polymer materials behave differently to certain gasses. Likewise, different gasses
behave differently to the same material. Experiences tell us the following Rules
of Thumb:

 * For a monolayer polymer, the CO2TR is usually 3-8 times higher than OTR, N2TR
   is usually 3 times lower than OTR. The WVTR could be high or low depending on
   the polarity of the polymer.
 * For a monolayer polymer, the TR is reversely proportional to the film thickness.
 * Polar polymers are usually better gas barriers, while non-polar polymers are 
   mostly better moisture barrier.
 * Gases with smaller molecular sizes (H2, He, etc.) usually have much higher transmission
   rates than oxygen.
 * For practical applications, multi-layer barrier materials or special coated materials
   are the solutions for products need protections from several gases.

You can check all the products here – [https://flexitest.in/barrier-testing-systems](https://flexitest.in/packaging-testing-equipments/permeability-testing-instruments/)

## Recent Post

[ ⌊IS 11652 UV Weathering Test for Cement Sacks 1⌉ ](https://flexitest.in/blogs/is-11652-uv-weathering-test-cement-sacks/)

## 󠀁[IS 11652 UV Weathering Test for Cement Sacks](https://flexitest.in/blogs/is-11652-uv-weathering-test-cement-sacks/)󠁿

 October 28, 2026

[ ⌊Salt Spray Chamber A Complete Guide to Salt Spray Corrosion Testing 1⌉ ](https://flexitest.in/blogs/salt-spray-chamber-guide/)

## 󠀁[Salt Spray Chamber: A Complete Guide to Salt Spray Corrosion Testing](https://flexitest.in/blogs/salt-spray-chamber-guide/)󠁿

 October 12, 2026

[ ⌊HDPE PP Woven Sack Testing BIS Requirements and Choosing the Right UTM⌉ ](https://flexitest.in/blogs/hdpe-pp-woven-sack-testing-bis-utm-selection/)

## 󠀁[HDPE & PP Woven Sack Testing: BIS Requirements and Choosing the Right UTM](https://flexitest.in/blogs/hdpe-pp-woven-sack-testing-bis-utm-selection/)󠁿

 October 8, 2026

[ ⌊Air Permeability Tester for Technical Textiles A Complete Guide to the FX 3300 LabAir IV 1⌉ ](https://flexitest.in/blogs/air-permeability-tester-fx-3300-labair-iv-guide/)

## 󠀁[Air Permeability Tester for Technical Textiles: A Complete Guide to the FX 3300 LabAir IV](https://flexitest.in/blogs/air-permeability-tester-fx-3300-labair-iv-guide/)󠁿

 September 30, 2026