# Salt Spray Chamber for Plastic & Polymer Material Testing - Link: https://flexitest.in/plastic-and-polymer/salt-spray-chamber-for-plastics/ - Published: 2026-10-06T16:06:04+05:30 - Author: kamal # Salt Spray Chamber for Plastic & Polymer Material Testing 1. [Home](https://flexitest.in) 2. [Plastic and Polymer](https://flexitest.in/plastic-and-polymer/) 3. Salt Spray Chamber for Plastic & Polymer Material Testing ## programmable 880T salt spray chamber Plastics don’t rust, but they still fail in salty, humid environments. Metallised and chrome-plated plastic trims blister, painted polymer housings lose adhesion, metal inserts corrode inside moulded parts, and some compounds swell, discolour or crack under damp heat and salt mist. The Flexitest programmable salt spray chamber( models 880/T, 881/T and 882/T) lets polymer processors and moulders measure these effects under controlled, repeatable conditions. ![](https://flexitest.in/wp-content/uploads/2026/10/Flexitest_880_t_product_banner. webp "Salt Spray Chamber for Plastic & Polymer Material Testing 3") ![Flexitest 880T tiles image](https://flexitest.in/wp-content/uploads/2026/10/Flexitest- 880T-tiles-image.webp "Salt Spray Chamber for Plastic & Polymer Material Testing 4") The chamber follows ISO 4611, the standard for determining the effects of damp heat, water spray and salt mist on plastics, and ASTM D1735 water fog testing for coatings on plastic substrates. It also runs ASTM B117, ISO 9227 and CASS tests for plated- on-plastic parts used in automotive interiors, sanitaryware, electrical enclosures and consumer appliances. Get Instant Quote #### Submit Your Details to Download Brochure! Name Email Phone Number Company Name Company Location By clicking the button, I agree and consent to the company’s [Privacy Policy](https://flexitest.in/privacy-policy) ![Salt Spray Corrosion Comparison](https://flexitest.in/wp-content/uploads/2026/ 10/Salt-Spray-Corrosion-Comparison.webp "Salt Spray Chamber for Plastic & Polymer Material Testing 5") Damp Heat, Water & Salt Mist Exposure Water Fog Coating Resistance Test Salt Spray Corrosion Comparison Flexitest 880T tiles image ## Features 1. **Built for plastics standards:** ISO 4611 (damp heat, water spray and salt mist on plastics) and ASTM D1735 (water fog), plus ASTM B117, ISO 9227, ASTM B368 (CASS for plated plastics), ASTM G85 and DIN 50021. 2. **Gentle, controlled heating:** Heating wires on the outer layer of the inner plate warm the chamber by radiation, with PID control. Working room RT+5 °C to 55 °C with ≤ ±2 °C uniformity, so temperature-sensitive polymers see a steady environment. 3. **Salt fog or plain water fog:** The peristaltic pump supply works with salt solution or water, so one chamber runs both salt mist and water fog tests. 4. **Flexible sample rack for moulded parts:** Rods, V-shaped glass-fibre brackets( 20° ± 5°) and a mesh plate hold flat plaques, housings, trims and odd-shaped mouldings. Rack capacity is above 200 kg. 5. **Long-duration ageing tests:** Continuous fog up to 999.9 hours, or intervals of up to 99 h 59 min spray and 99 h 59 min pause, set on the TEMI 880 7-inch touch screen. 6. **Clean results, no drip marks:** The inclined lid keeps condensate off sample surfaces, which matters for gloss, colour and appearance ratings on plastics. 7. **Data you can report:** Up to 360 days of logged temperature and test data, USB program and data transfer, and RS232 connection for up to 16 chambers. * Built for plastics standards: ISO 4611 (damp heat, water spray and salt mist on plastics) and ASTM D1735 (water fog), plus ASTM B117, ISO 9227, ASTM B368 ( CASS for plated plastics), ASTM G85 and DIN 50021. * Gentle, controlled heating: Heating wires on the outer layer of the inner plate warm the chamber by radiation, with PID control. Working room RT+5 °C to 55 °C with ≤ ±2 °C uniformity, so temperature-sensitive polymers see a steady environment. * Salt fog or plain water fog: The peristaltic pump supply works with salt solution or water, so one chamber runs both salt mist and water fog tests. * Flexible sample rack for moulded parts: Rods, V-shaped glass-fibre brackets( 20° ± 5°) and a mesh plate hold flat plaques, housings, trims and odd-shaped mouldings. Rack capacity is above 200 kg. * Long-duration ageing tests: Continuous fog up to 999.9 hours, or intervals of up to 99 h 59 min spray and 99 h 59 min pause, set on the TEMI 880 7-inch touch screen. * Clean results, no drip marks: The inclined lid keeps condensate off sample surfaces, which matters for gloss, colour and appearance ratings on plastics. * Data you can report: Up to 360 days of logged temperature and test data, USB program and data transfer, and RS232 connection for up to 16 chambers. Get Free Quote ## FAQs  Frequently Asked Questions (FAQs) – Salt Spray Chamber Why do plastic parts need salt spray testing? Most plastic products contain or carry something that can corrode or degrade: plated or painted surfaces, metal inserts, or additives sensitive to moisture. Salt spray testing reveals blistering, adhesion loss, discolouration and insert corrosion before parts are released. What is ISO 4611? ISO 4611 describes how to expose plastics to damp heat, water spray and salt mist, and how to assess changes afterwards in properties such as appearance, mass, dimensions and mechanical strength. Can I test chrome-plated plastic parts? Yes. Plated-on-plastic parts are usually tested with CASS to ASTM B368 or with neutral salt spray to ASTM B117 or ISO 9227. The chamber supports all three. Can the chamber run a water fog test instead of salt spray? Yes. Fill the external tank with water instead of salt solution to run ASTM D1735 water fog tests for coatings on plastic and other substrates. How do I choose the right chamber size for polymer samples? Match the working-room volume to your largest part and the number of samples per test, leaving space for fog to circulate. Share your sample sizes with our team at sales@flexitest.in or +91 93263 25135, and we will recommend the 880/T, 881/T or 882/T. ## Related Machines [⌊Accelerated Weathering Chamber – Plastic Polymer⌉⌊Accelerated Weathering Chamber– Plastic Polymer⌉[ [Accelerated Weathering Chamber – Plastic Polymer](https://flexitest.in/plastic-and-polymer/accelerated-weathering-chamber-plastic-polymer/) Accelerated weathering chambers for plastics and polymers, reproducing UV, heat and moisture exposure to predict colour, gloss and strength loss. [View Details ](https://flexitest.in/plastic-and-polymer/accelerated-weathering-chamber-plastic-polymer/) [⌊Colour Measurement Instruments for Plastics and Polymers⌉⌊Colour Measurement Instruments for Plastics and Polymers⌉[ [Colour Measurement Instruments for Plastics and Polymers](https://flexitest.in/plastic-and-polymer/flexitest-colour-measurement-solutions/) Compare TS7700, YH1000 and YS6060 for reflected colour, transmitted colour, haze and luminous transmittance testing in plastic and polymer QC. [View Details ](https://flexitest.in/plastic-and-polymer/flexitest-colour-measurement-solutions/) [⌊Drying and Heating Chamber plastic polymer⌉⌊Drying and Heating Chamber plastic polymer⌉[ [Drying and Heating Chamber plastic polymer](https://flexitest.in/plastic-and-polymer/drying-and-heating-chamber-plastic-polymer/) BINDER drying and heating chambers for plastics and polymers, removing moisture before processing to prevent bubbles, cracks and weak spots. [View Details ](https://flexitest.in/plastic-and-polymer/drying-and-heating-chamber-plastic-polymer/) [⌊HDT Vicat Tester⌉⌊HDT Vicat Tester⌉[ [HDT Vicat Tester](https://flexitest.in/plastic-and-polymer/hdt-vicat-tester/) HDT and Vicat softening point tester determines heat deflection temperature and softening point of plastics to ISO 75 and ISO 306. [View Details ](https://flexitest.in/plastic-and-polymer/hdt-vicat-tester/)