Salt Spray Chamber for Paint & Coating Corrosion Testing

  1. Home
  2. Paint /Coating/ Metals
  3. Salt Spray Chamber for Paint & Coating Corrosion Testing

programmable 880T salt spray chamber

A paint or coating is only as good as its ability to stop rust from creeping underneath it. The Flexitest programmable salt spray chamber (models 880/T, 881/T and 882/T) gives paint manufacturers, powder coaters, electroplaters and QC labs a controlled, repeatable salt fog environment to prove that performance before a product reaches the customer.

Use it to run neutral salt spray (NSS), acetic acid (AASS) and copper-accelerated (CASS) tests on painted panels, primers, powder coats, zinc and nickel-chrome plating, and anodised finishes. Blistering, scribe creep, undercutting and loss of adhesion show up in hours or days instead of years of outdoor exposure.

Flexitest 880 t product banner
T Product banner Paint mobile
Flexitest 880T salt spray chamber

The chamber is built with a titanium inner cabinet, PID-controlled air heating and a peristaltic pump spray system. That combination keeps temperature and fog fall-out steady for long test cycles, so your results match the standard and hold up in customer and third-party audits.

Features

  1. Tests to paint and coating standards: ASTM B117, ISO 9227, ISO 7253 (paints and varnishes, neutral salt spray), ASTM B368 (CASS), ASTM B380 (Corrodkote), ASTM G85, ASTM D1735 (water fog) and DIN 50021.
  2. Stable, uniform temperature: Working room from RT+5 °C to 55 °C, uniformity ≤ ±2 °C and stability ≤ ±0.5 °C, controlled by PID air heating so the salt solution’s concentration and pH stay unaffected.
  3. Consistent fog fall-out: An external large-capacity tank feeds the nozzle through an adjustable peristaltic pump, avoiding the nozzle crystallisation common in siphon systems and keeping the collection rate on target.
  4. Panel rack set at the correct angle: Three-level rack with corrosion-resistant rods and V-shaped glass-fibre brackets holds test panels at 20° ± 5°, as coating standards require. A mesh plate handles larger parts; the rack carries more than 200 kg.
  5. Long test cycles, fully programmable: TEMI 880 7-inch touch-screen controller with program, fixed-value and timed start/stop modes. Continuous fog up to 999.9 hours; interval fog up to 99 h 59 min spray and 99 h 59 min pause.
  6. Condensation kept off your panels: The inclined cover stops drips from falling on samples and spoiling a test, and a silicone gasket prevents corrosive gas leakage.
  7. Traceable data for audits: Battery-backed memory logs set values, readings and time for up to 360 days (at a 2-minute sampling interval). Export programs and data by USB, or connect up to 16 chambers over RS232.
  8. Built to last in a corrosive environment: Titanium inner chamber, painted steel outer body, air-cylinder operated lid and fully separated water and electrical sections.

Salt Spray Chamber

Programmable Corrosion Test System — Automotive Grade

Complete technical specifications for the Model 880T Programmable Salt Spray Chamber — TEMI 880 controller, multi-standard corrosion testing for automotive components.

Specification Model 880T Details
Sample Rack & Loading
Rack LayersThree layers, corrosion-resistant rods
Rack BracketsV-shaped glass-fibre, 20° ± 5° angle
BaseMesh base plate for large parts
Load Capacity> 200 kg, uniformly distributed
Temperature & Stability
CASS Working Room Temp50 °C — reached in under 45 min
CASS Saturated Air Barrel Temp63 °C — reached in under 45 min
Temperature Stability≤ ±0.5 °C
Spray & Fog Control
Interval Fog CycleSpray and pause — each up to 99 h 59 min
Continuous Fog DurationUp to 999.9 hours
Salt Solution FeedPeristaltic pump from external large tank
Controller & Data
Controller ModelTEMI 880
Display7-inch colour touch screen, 800 × 480 px
Start / Stop ModesProgram, fixed-value and timed
Data LoggingSet & measured values — up to 360 days at 2-min intervals
Data TransferUSB · RS232 network (up to 16 chambers)
Test Capabilities
Neutral Salt Spray (NSS)✓ ASTM B117 / ISO 9227
CASS Test✓ ASTM B368 — decorative chrome & nickel
Modified Cyclic Salt Fog✓ ASTM G85
Corrodkote Test✓ ASTM B380
DIN Standard✓ DIN 50021
Typical Automotive Applications
FastenersZinc and zinc-nickel plated fasteners
Body PartsE-coated and painted body panels
TrimDecorative chrome trims
AluminiumAnodised aluminium components
Chassis & BrakesBrake parts, chassis components, electrical connectors
Supported Test Standards
Standard Test Type Application
ASTM B117Neutral Salt Spray (NSS)General corrosion resistance — most common automotive spec
ASTM B368CASS (Copper-Accelerated)Decorative chrome, nickel plating quality check
ASTM G85Modified / Cyclic Salt FogCloser-to-real-world cyclic corrosion testing
ASTM B380CorrodkoteAccelerated corrosion for plated components
ISO 9227Neutral / AASS / CASSInternational OEM & tier-1 supplier requirements
DIN 50021Neutral Salt SprayEuropean automotive & industrial specifications
Model 880T Salt Spray Chamber
Programmable · TEMI 880 Controller
Sample Rack & Loading
Rack Layers3 layers, corrosion-resistant rods
Rack BracketsV-shaped glass-fibre, 20° ± 5°
Load Capacity> 200 kg
Temperature
CASS Room Temp50 °C (<45 min)
CASS Barrel Temp63 °C (<45 min)
Stability≤ ±0.5 °C
Spray & Fog
Interval Fog CycleUp to 99 h 59 min each
Continuous FogUp to 999.9 hours
Salt Solution FeedPeristaltic pump
Controller & Data
ControllerTEMI 880
Display7" colour touch, 800 × 480
Data Logging360 days @ 2-min intervals
Data TransferUSB · RS232 (16 chambers)
Test Standards
ASTM B117✓ Neutral Salt Spray
ASTM B368✓ CASS
ASTM G85✓ Cyclic Salt Fog
ASTM B380✓ Corrodkote
ISO 9227✓ NSS / AASS / CASS
DIN 50021✓ Neutral Salt Spray
Automotive Applications
FastenersZinc / zinc-nickel plated
Body PartsE-coated & painted panels
TrimDecorative chrome trims
AluminiumAnodised components
Chassis & BrakesBrake parts, connectors
Supported Test Standards
ASTM B117NSS
Neutral Salt Spray — most common automotive corrosion spec for general components.
ASTM B368CASS
Copper-Accelerated Salt Spray — decorative chrome and nickel plating quality.
ASTM G85Cyclic
Modified & cyclic salt fog — closer-to-real-world corrosion simulation.
ASTM B380Corrodkote
Accelerated corrosion test for plated components.
ISO 9227NSS/CASS
International OEM & tier-1 supplier corrosion requirements.
DIN 50021NSS
European automotive & industrial neutral salt spray specification.

Need help selecting the right Salt Spray Chamber?

Share your test standard, sample size and cycle requirement — we'll recommend the right model for your corrosion testing lab.

FAQs

 Frequently Asked Questions (FAQs) – Permeability Testing Instruments

ASTM B117 and ISO 9227 are the most widely specified. ISO 7253 is written specifically for paints and varnishes. Your customer’s specification usually names the standard and the required hours.

It depends on the coating and end use. Primers are often tested for 96–240 hours, while industrial and automotive paint systems are commonly specified at 500–1,000 hours or more. The chamber runs continuous tests up to 999.9 hours.

Yes. The chamber supports NSS, AASS and CASS test conditions, covering powder coating, liquid paint, zinc, nickel and decorative chrome plating.

Standards require panels to sit at a set angle to the vertical so fog settles evenly. The Flexitest rack holds panels at 20° ± 5° using V-shaped glass-fibre brackets.

Yes. Flexitest is based in Kurla, Mumbai, and supplies salt spray chambers to paint and coating manufacturers across India. Contact us at +91 93263 25135 or sales@flexitest.in for a quotation.

Related Machines

Accelerated Weathering Solutions- Paint / Coating

Accelerated weathering systems for paints, coatings and metals, simulating years of sunlight, moisture and temperature change in weeks.

View Details
Flexitest Colour measurement solutions – Paints

Compare TS7700, YH1000 and YS6060 instruments for colour measurement of paints and coatings, haze and laboratory quality control. Request expert guidance.

View Details
Paint, Coating & Metals  Drying and Heating Chambers

BINDER drying and heating chambers with natural or forced convection, built for drying, ageing and heat treatment of Paint, Coating & Metals samples.

View Details
TS8500 Benchtop Spectrophotometer

Measure colour in paints, coatings and metal finishes with the TS8500-E benchtop spectrophotometer. Explore SCI/SCE modes and request a demo from Flexitest.

View Details
×
Highlights
Scroll to Top
Flexitest logo
Flexitest logo