Thermal Shock Chamber
Reliable Thermal Shock Chambers for Quality Assurance
Thermal shock testing also called temperature shock testing or temperature cycling exposes products to alternating low and high air temperatures to accelerate failures caused by repeated temperature variations during normal use conditions. It is used to accelerate failure modes caused by very rapid changes in temperature.
Two-zone thermal shock test chamber is equipped with a hot and a cold dual zone with individual chamber control. It provides a thermal shock range from (-60 °C to 200°C)
Air control method
The temperature and humidity signals sensed by the temperature and humidity sensors are input to the central micro-computer controller through A/D conversion. After the controller’s internal software algorithm PID comparison operation, the output command drives the PLC to make the air system, refrigeration system, heating system and humidification system. The de-humidification system works together to precisely control the target temperature and humidity.
Features
- The European F-Gas regulation targets a 70% reduction in CO2 emissions from the industrial sector
compared to 1990 levels by 2030. Carbon dioxide emissions have fallen by 23% from 1995 to 2016.
The new rules aim to reduce EU emissions of fluorinated greenhouse gases (fluorinated gases) by 700,000 tonnes of carbon dioxide equivalent by 2030, equivalent to 35 million tonnes. - In view of EU regulations and environmental protection, all the test chambers produced by our company
use refrigerants that are more environmentally friendly and have lower GWP. - Replace R404 with R448A or R449A and R23 with R508.
Submit Your Details to Download Brochure!
Related Machines
Drying and Heating Chamber, Binder M115 for accurate drying, ageing and heat treatment of automotive test specimens.
View Details
Forced Convection Drying and Heating Chamber - BINDER FED 720 with programmable profiles for automotive ageing tests |
View Details
BINDER FD 56 forced convection drying and heating chamber, 56 litre, for drying, ageing and heat treatment of automotive samples.
View Details
Compare xenon and UV accelerated weathering chambers for automotive materials in India. Explore benchtop and larger models, sample capacity and configuration.
View Details
